In this paper, a Fuzzy-PI controller in which parameters of PI controller can be adjusted online by the fuzzy regulator.
本文设计了模糊pi控制器，通过模糊控制对PI参数在线调节。
Though optimizing quantification factor and proportionality factor of Fuzzy-PI controller, optimizing the membership function, then make the system response has good dynamic and steady performance.
通过优化模糊pi控制器的量化因子和比例因子，从而优化隶属函数，使控制系统具有很好的稳态和动态性能。
Fuzzy PI controller has good robustness and flexible control, but it has maximal overshoot and slow response when used in the process with large time delay.
模糊PI控制器具有鲁棒性强、控制灵活等优点，但是将其应用于纯迟延系统时超调量较大、响应速度慢。
Integrating intelligent and PI control arithmetic, we obtained a fuzzy hybrid controller based on PI.
本文将智能控制算法和PI控制算法相结合，提出了一种基于PI的模糊混合控制器。
This paper presents a design method of parameter self tuning fuzzy PI controller. Simulations have shown that the controller has good control performances and robustness in much control process.
提出一种参数自校正模糊pi控制器的设计方法，该方法具有算法简单、控制品质较好等优点。
PI arithmetic is utilized in fuzzy controller to adjust the proportionality factor of fuzzy controller automatically.
在简单模糊控制器的基础上，利用PI控制算法自动调整模糊控制器比例因子。
Air and fuel controlling of this stove are realized by PI controller, and temperature controlling adopts self adaptive genetic fuzzy controller.
热处理炉空气、燃料的控制均采用遗传算法优化的PI控制，炉体温度控制采用自适应的遗传模糊控制器。
In the control system, the conventional PI controller was implemented in the current loop, in the speed loop the fuzzy PI hybrid control scheme was applied.
系统中电流环仍采用PI控制器，速度环采用常规pi和模糊控制相结合的方法来实现。
The paper bring forward a fuzzy controller of self-tuning proportion factor based on PI arithmetic.
本文提出一种基于PI算法的自调整比例因子模糊控制器。
The proper fuzzy rules and proportion quantification factors were chosen in fuzzy controller. In addition, proportional and integral factors were selected in PI regulator.
对模糊控制器选择了适当的模糊规则和合适的比例量化因子，并且对PI比例调节器选择了合适的比例积分因子。
For AC servo system of permanent magnet synchronous motor (PMSM), the position servo controller was constructed with direct torque control and self-adjusting PI control based on Fuzzy inferences.
在永磁同步电机交流伺服系统中，采用直接转矩控制及模糊自适应PI控制构成位置伺服控制器。
In this paper, speed loop adopting fuzzy control scheme which takes place of common PI controller, is to improve the performance of disturbance rejection.
本论文首先将模糊控制应用于变频调速系统的转速环，取代常规的PI调节器，旨在提高系统的抗干扰能力。
A fuzzy neural decoupled hybrid controller is obtained by combining PI with fuzzy neural network.
将模糊神经网络与PI控制技术相结合构成一种模糊神经解耦混合控制器。
The PI control and fuzzy control were used to design engine fuzzy PI throttle controller and lookup tables were given.
应用模糊控制方法建立了油门的模糊pi控制系统，给出了参数查询表。
Then a Fuzzy-PI compound controller suitable for this system has been designed in detail.
然后详细设计了适用于本系统的模糊-PI复合控制器。
Integrating fuzzy neural network and PI controller, we obtained a fuzzy neural decoupled hybrid controller.
本文将模糊神经网络与PI控制技术相结合构成一种模糊神经解耦混合控制器。
An 8-dof vehicle dynamics model was established and a fuzzy PI controller and a control strategy of a vehicle stability control system were developed.
首先建立了八自由度的汽车动力学模型，设计了模糊pi控制器和汽车稳定性控制策略。
The actual debugging experiments of two kinds of fuzzy-PI compound controller are carried on, and the experimental results are analyzed and summarized.
对两种模糊- PI复合控制进行了实际的调试实验，并对实验结果做出了分析和总结。
By comparing the PID controller algorithm and fuzzy controller algorithm we obtained that anti-delay quasi-PI controller algorithm has a good robustness and immunity.
通过与PID控制算法、模糊控制算法对组合积分系统控制效果比较发现，抗时滞伪PI控制算法具有良好的鲁棒性和抗干扰性。
The controller is made up of fuzzy control part, PI controller and self-tuning regulator.
该控制器由模糊控制环节、PI控制器、自校正环节构成。
The Fuzzy-predictive control system uses the Fuzzy-PI control algorithm of parameter self-adjusting and the design process of off-line key part of fuzzy controller in this system is given in detail.
该模糊预测控制系统采用了带参数自整定的模糊-积分复合控制算法，详细给出了离线部分的设计过程，并提出了可用于工程实现的参数自整定算法。
The Fuzzy-predictive control system uses the Fuzzy-PI control algorithm of parameter self-adjusting and the design process of off-line key part of fuzzy controller in this system is given in detail.
该模糊预测控制系统采用了带参数自整定的模糊-积分复合控制算法，详细给出了离线部分的设计过程，并提出了可用于工程实现的参数自整定算法。
应用推荐