The wave profile along ship hull and wave contours were obtained.
计算获得了船体上波形以及船波等值线图。
Dynamic Stiffness Matrix Method is applied to compute vibration of ship hull.
采用动态刚度阵法计算船体总振动的固有频率。
Therefore, collectivity design on The Underwater Ship Hull Cleaning Robot is finished.
完成了船体表面清刷机器人的总体设计。
The bending-torsion coupling vibration of ship hull attracts more attention in recent years.
大开口船的弯扭耦合振动问题近年来愈来愈多地受到人们的重视。
It is defined the mathematical ship hull to use mathematical function in designing hull lines.
数学船型就是用数学函数表达和设计船体型线。
The Liuting Pavilion looks like an abstract ship hull in exterior shape, and lotus fills the entire pond.
留听阁在外观上看起来像一个抽象的船体，其池塘中荷花满溢。
The effective wake is one of the primary reasons of propeller cavitation and induced ship hull vibration.
实效伴流的不均匀性是引起螺旋桨空泡、振动的主要原因之一。
The phenomena and feature of whipping response of a ship hull induced by underwater explosion are discussed.
本文揭示了水下非接触爆炸产生的气泡脉冲激起细长形船体作鞭状响应运动的现象。
The design of magnetic structure is the key technology of ensuring reliable adsorption of the robot on the ship hull.
磁路结构的设计是保证机器人在船体表面可靠吸附的关键技术。
This paper presents a composite mechanical model of membrane element and beam element for ship hull and superstructure.
本文提出了用膜元与集中质量的组合形式作为上层建筑的力学模型。
The use of GRP material for the ship hull brought about a lot of questions to the design of electric systems of the ship.
船体材料为玻璃钢的船舶，给电气设计带来了不少难题。
The different structuring forms of GFRP ship hull will influence the structure performance and movement performance directly.
玻璃钢(GFRP)艇体结构形式不同，直接影响艇体的结构性能和运动性能。
A practical model has been presented to analyze the response of ship hull to underwater shock according to DAA1 approximation.
根据DAA1近似建立了一种简单实用的用于分析船板水下冲击响应模型。
A method for reliability assessment of the strength of a degraded ship hull in the presence of corrosion and fatigue is developed.
针对腐蚀和疲劳裂纹对船体强度的影响，提出一种结构可靠性的评估方法。
Propeller cavitation degrades propeller performance, erodes blade surfaces, produces noise, and causes vibration on the ship hull.
螺旋桨空泡会降低螺旋桨性能，产生空化剥蚀和噪声，从而导致船体振动。
When sailing in waves, ship hull total bending deformation will reduce the center distance of gear backing radially arranged in ship hull.
船舶在波浪中航行时，船体总弯曲变形会使沿船体纵向布置齿轮机构的轴承支座中心距产生缩减。
The information and navigating performance of excellent ship hull form are main technical supports to ship design and new ship form development.
优秀船型及其性能资料是船舶设计和新船型开发的主要技术支撑之一。
The features, method and standard of drop weighed tear test are described with its application in steels for pipes, pressure vessels and ship hull.
论述了落锤撕裂试验的特点、方法和标准，以及该试验在管道钢材、压力容器钢和船体结构钢薄板上的应用情况。
The basic function of this rapid modeling system is to setup ship hull form model, general arrangement model and main longitudinal structure model.
该快递建模系统的基本功能是建立船体型线模型、总布置模型和主要纵向结构模型。
This paper introduces the calculating methods of diesel engine and propeller induced forces which often result trouble in ship hull steady vibration.
本文介绍引起船体稳态振动的柴油机及螺旋桨激振力的计算方法。
This paper presents raw material properties of FRP sandwich construction for ship. FRP sandwich construction design for local and overall strength of ship hull.
本文简单介绍船用玻璃钢夹层结构的原材料性能，船体局部强度的玻璃钢夹层结构设计，及船体总强度的玻璃钢夹层结构设计。
The formulae provided by CCS newly developed Fatigue Strength Guideline for Ship Hull Structures are also compared with those of other classification societies.
文中还将中国船级社近期编制的《船体结构疲劳强度指南》中给出的船体水平弯矩和波浪扭矩公式与国外船级社的公式进行了比较。
Both the ship hull vibration and the local vibration of ship stern structures should be taken into consideration in the vibration problem of ship stern structures.
船舶尾部结构的振动问题应同时从船体总振动和尾部结构的局部振动两方面来考虑。
The use of sea water in ballast water tank of sea-going ships causes the corrosion of ship hull plates and the water leak from the corroded holes at welding seams.
海船压载舱使用海水压载，引起船体板的腐蚀，焊缝处会产生蚀孔漏水。
The study of the effectiveness of the dynamic vibration absorber in reducing harmonic response of the ship hull girder using the finite element method is presented.
采用有限元法研究了动力吸振器减小船体梁结构谐波振动响应的有效性。
A magnetic absorbing machine of underwater ship hull surface cleaning robot was innovated for obtaining better performance of the robots absorbing and moving function.
为了实现水下船体表面清刷机器人在水下船体表面上的可靠吸附和灵活移动功能，对机器人磁吸附机构进行了设计研究。
This paper presents the theory and method of analyzing horizontal-torsion-coupled dynamic behavior of a ship hull with large hatch opening by the transfer matrix method.
提出了用迁移矩阵法分析长大舱口船弯扭耦合动力特性的理论和方法。
Based on the characteristics of differential geometry and the tabu search algorithm, a new method for the profile error of ship hull plate processing surface is presented.
利用曲面的微分几何特性，基于禁忌搜索算法，提出一种新的船体外板曲面形状误差评定方法。
Buckling and plastic collapse of the stiffened panels which is composed of the deck, bottom plating and side shell easily causes the overall failure of a ship hull girder.
甲板、船底板、舷侧板和加强筋所构成的加筋板的屈曲和塑性破坏通常容易导致船体梁的总体失效。
At last, the calculating method of the fracture toughness of ship hull steel plate based on probability is founded and the related software interface is developed as well.
最终确定建立在概率基础上的船用钢板断裂韧性值的评价，并开发了相应的计算软件。
应用推荐