Hardware consists of microcomputer, stepping motor control card, stepping motor driver and stepping motor and so on.
硬件由微机、步进电机控制卡、步进电机驱动器和步进电机等器件组成。
The stepping motor can not be separated from its drive.
步进电动机系统是由步进电动机及其驱动器构成的。
This system can be widely used in stepping motor controlling.
该系统可应用于步进电机控制的大多数场合。
Drive of stepping motor and processing of grating scale signal.
步进电机的驱动和光栅尺信号的处理。
Such as "Hardware Pulse Assignor" used by driving stepping motor.
如驱动步进电机用的“硬件脉冲分配器”。
Design a sequence generator for the operation of a stepping motor.
设计一个控制步进电机工作的序列产生器。
This article introduces a new kind of stepping motor control driver.
介绍了一种新型步进电机控制驱动器。
Ac servo system in many performance is better than the stepping motor.
交流伺服系统在许多性能方面都优于步进电机。
Ac servo system in many performance are better than the stepping motor.
交流伺服系统在许多性能方面都优于步进电机。
These involve the single step response characteristic of stepping motor.
这些涉及步进电动机的单步响应特性。
L297 is a type of dedicated chip applied in control of two phase stepping motor.
L 297是一种适用于两相步进电机控制的专用芯片。
In this paper, a set of stepping motor drive system used in stage lighting is presented.
文章介绍了应用于舞台灯光摇头灯中的步进电机控制系统。
The model provides an important theory foundation for the speed control of stepping motor.
所建模型为步进电机的速度控制提供了理论依据。
The paper puts forward a cylindrical staggered-sheet structure micro linear stepping motor.
提出了一种圆筒型错片结构微型直线步进电机。
This paper introduces the driven control technology of Vehicle dashboard with stepping motor.
主要介绍步进电机式车载组合仪表驱动控制技术。
The paper discusses the single step response characteristic on five-phase hybrid stepping motor.
本文研究了五相混合式步进电动机的单步响应特性。
The practice shows that the performance of this system outdoes the traditional stepping motor controller.
实践表明,系统性能优于传统的步进电机控制器。
A cogging torque measurement system was proposed, which was composed of stepping motor, torque sensor, etc.
提出了一种由步进电机、转矩传感器等元件组成的齿槽转矩测试系统。
This paper introduces two control methods of the flying cut, with brushless DC motor and with stepping motor.
讨论无刷直流电机、步进电机在旋转飞剪系统中应用时的跟踪控制方案,分析了两种方案的异同。
The stepping motor is extensively used as the executive mechanism in the feed servo system of economical type NC lathe.
在经济型数控车床的进给伺服系统中,广泛地采用步进电机做为执行机构。
The thesis presents the subdivision drive method by analyzing the mathematics models of two-phase hybrid stepping motor.
论文通过分析两相混合式步进电机的数学模型,介绍了两相混合式步进电机的细分控制策略。
The microcomputer controlled test stand 701 adopts power stepping motor to drive the original operating valve to carry out tests.
此种微机控制701试验台,是采用功率步进电机驱动原操作阀进行试验的。
The design example of a tranquil flow pump control system of the stepping motor shows that the project is feasible and effective.
步进电机驱动的平流泵控制系统设计实例表明,这种方案是行之有效的。
The controller case includes stepping motor, self-coupling voltage regulator, alternating-current contactor, relay and micro-transformer.
控制柜主要包括步进电机、自耦调压器、交流接触器、继电器以及微型互感器等。
This paper introduces a double freedom degree motion control system of satellites antenna based on dual-redundancy hybrid stepping motor.
介绍了一种基于双余度混合式步进电动机的双自由度卫星天线运动控制系统。
It briefly describes the working principle of stepping motor based upon the gate tests at the intake tunnel for Laxiwa hydropower project.
以拉西瓦水电站进水口快速闸门模型试验为例,简要阐述了步进电机的工作原理。
Tuning mechanism consists of diffraction grating, trigger controller and high frequency stepping motor of monolithic microprocessor control.
调谐机构由单片机控制的高频步进电机、衍射光栅、触发控制器组成。
The longitudinal mobile platform with the inspection module in place is actuated by a stepping motor moves along a guide rail intermittently.
检测模块安装在纵向移动平台上,纵向移动平台由步进电机驱动沿导轨做间歇直线运动。
The rotating of the stepping motor, the working procedure of the NC Machine Tools and the movement of the conveyer belt are controlled by PLC.
采用PLC对数控机床的加工工艺流程、步进电机的旋转以及零件输送带的运动进行控制。
The rotating of the stepping motor, the working procedure of the NC Machine Tools and the movement of the conveyer belt are controlled by PLC.
采用PLC对数控机床的加工工艺流程、步进电机的旋转以及零件输送带的运动进行控制。
应用推荐