Roller in the simple, zinc plating production.
从事简单的滚、镀锌电镀生产。
Non-chrome passivation; Silicate; Zinc plating; Corrosion resistance;
无铬钝化；硅酸盐；镀锌； 耐蚀性；
The process flow of production for zinc plating on hinge was introduced.
介绍了铰链镀锌生产的工艺流程。
Electrochemical characteristics of the zinc plating solution are also studied.
同时研究了镀锌液的电化学特性。
The mechanical zinc plating of low carbon steel by high energy ball milling was studied.
利用高能球磨原理实现了低碳钢的机械镀锌。
The process flows and formula of new system of non-cyanide alkaline zinc plating were introduced.
介绍了新型无氰碱性镀锌体系的工艺流程和工艺配方。
Rotating disk electrode system is used to study the coating roughness in high-speed zinc plating.
将旋转圆盘电极体系应用于高速镀锌层粗糙度的研究。
Zinc plating chromic acid salt after the passivation, corrosion resistance can improve 6 to 8 times.
锌镀层经铬酸盐钝化之后，耐蚀性可提高6 ~8倍。
Characteristics of BH-332 low Cyanide zinc plating process and maintenance of the bath are described.
着重介绍BH—332低氰镀锌工艺的特点和镀液的维护。
The mechanism of chromating film change color on KCl zinc plating are discussed from the theory and practice.
本文从理论和生产实践的角度对氯化钾镀锌钝化膜变色的机理，进行了探讨，并提出了一些具体的控制措施。
It was introduced a technics of non-cyanide zinc plating, using sodium hydrate and zinc monoxide as main salts.
介绍了一种以氢氧化钠、氧化锌为主盐的无氰镀锌工艺。
Carrier of brightener ACTS as fining the crystal size, making main brightener more soluble in chloride zinc plating.
载体光亮剂在氯化物镀锌中起着细化晶粒和增加主光亮剂溶解度的作用。
The application of cyanide-free zinc plating processes to large-sized and shape-complicated workpiece was introduced.
介绍了无氰镀锌工艺在大尺寸、形状复杂的工件上的应用。
Zinc plating passivation, stained or coated guard light agent, can significantly improve the protective and decorative.
锌镀层经钝化处理、染色或涂覆护光剂后，能显著提高其防护性和装饰性。
The influences of grain diameter, grain shape and zinc content of zinc powder on mechanical zinc plating were analyzed.
分析了锌粉的粒径、颗粒形状、金属锌含量对机械镀锌层的影响。
New development of brighteners for alkaline zinc plating is reviewed with stresses on the advances in structure of monomers.
论述了现代碱性光亮镀锌添加剂单体结构的新进展及对锌电沉积过程的作用机理。
The process of surface treatment of cast iron hardware and the process flows of its mechanical zinc plating were introduced.
介绍了铸铁五金件的表面处理工艺及其机械镀锌工艺流程。
The apparatus is made of zinc plating iron plate, and composed of the respiratory chamber, the water conducting tube and the handle.
该呼吸器用镀锌薄铁制成，由呼吸室、导水管、手柄等部分组成。
Hiro plating Ltd. is a research and development enterprise with advanced technique in the field of zinc plating of automobile parts.
日本广镀金工业所是在汽车部件的电镀锌加工方面具有雄厚实力的研究开发型企业。
Influencing factors to the uniformity of coating thickness for alkaline zinc plating have been studied systematically by Hall-cell test.
采用霍尔槽试验对碱性镀锌镀层厚度均一性的影响因素进行了研究。
The applicable fields of alkaline cyanide-free zinc plating and acidic zinc plating before trivalent chromium passivation were proposed.
提出应用于三价铬钝化前的碱性无氰镀锌及酸性镀锌的适用场合。
The zinc plating could be used as bottom of chemical nickel plating and could deposit other protecting decorating metal coating layer on it.
所得锌镀层可 以作为化学镀镍的底层，也可以在其上沉积其它防护装饰性金属镀层。
Concentration of boric acid in bright sulfate zinc plating bath was determined referring to the same method for chloride type zinc plating bath.
将氯化物镀锌液中硼酸的测定方法用于测量光亮硫酸盐镀锌液中硼酸的含量。
Following the alkaline zinc plating process, the trivalent chromium passivation process is conducted to provide a protection layer for zinc coating.
碱性溶液所获得的镀锌镀层，采用三价铬溶液钝化。
With this method the concentration of DE in zinc plating bath of zincate can be satisfactorily determined. This method, in principle, is applicable tod…
微分电容法能满意地测定锌酸盐镀锌液中DE的浓度，而且在原则上可用于测定其它环氧-胺聚合物的浓度。
The structure of zinc deposits gained from the new system and the traditional system of alkaline zinc plating were determined by X-ray diffraction respectively.
通过X -射线衍射实验对从该体系和从传统的碱性镀锌体系中获得的锌镀层的结构分别进行了测试。
This paper summarized the merits and demerits of KCl zinc plating, and advanced some views on controls of main compositions, technical conditions and additives etc.
本文概述氯化钾镀锌的优缺点，对主成分的控制、工艺条件的控制、添加剂的控制等都提出了十分中肯的看法。
This paper summarized the merits and demerits of KCl zinc plating, and advanced some views on controls of main compositions, technical conditions and additives etc.
本文概述氯化钾镀锌的优缺点，对主成分的控制、工艺条件的控制、添加剂的控制等都提出了十分中肯的看法。
应用推荐