A solution for contact problem based on contact surface geometry is presented.
给出了一种基于接触面几何的接触问题解法。
Hexahedral ice has big contact surface and can make beverage quickly cool down.
六面体冰块，接触面大，可使饮料迅速冷却！
The distributions of stresses and deformations on contact surface are presented.
研究结果集中表现了接触区的变形、应力分布等情况。
Clean the floor at the contact surface positions with MEK or an equivalent solvent.
使用MEK或其它等效溶剂清洁地板上的贴合面区域。
This paper introduces an improved contour optimum design method on contact surface.
介绍一种改进的接触面外形优化设计方法。
Shear strength of most contact surface specimens decreases with large water content of soil.
各接触类型接触界面的抗剪强度随土体含水率的增大均呈下降趋势。
An actual contact surface burst leads to the highest possible overpressures near ground zero.
对于实际接触表面爆炸情况，在地面零点附近可形成最大的超压力。
The energy input from arc to contact surface is a decisive factor on erosion of contact materials.
电弧对触头表面的能量输入是影响触头侵蚀量的决定因素。
The contact surface of the sole (1) and the ground is provided with a wearable rubber or plastic layer (7).
此鞋底(1)与地接触面设有耐磨橡胶或塑料层(7)。
A special OPTIMESS sensor is mounted on the rim inside the tire and measures the contact surface of the tire.
特型OPTIMESS传感器被装于轮胎内侧轮沿上用于测量轮胎的接触面。
The development of NHRI-4000 high performance direct shear apparatus with large contact surface is introduced.
介绍了NHRI- 4000型高性能大接触面直剪仪研制与运用情况。
The radiating fin is designed in wave shape, in order to enlarge the radiating surface and the contact surface.
散热片设计为波浪型，增大了散热面积与接触面积。
The waviness of each contact surface of a ball bearing is the main reason which causes the ball bearing vibration.
滚动轴承零件各接触表面的波纹度是引起轴承振动的主要原因。
A contact surface profile measurement system which is based on white-light interference measuring technique is proposed.
提出了一种基于白光干涉测量技术的接触式表面形貌测量系统。
In 1975, 1976, Green and Stanley published a method to determine parameters of two-dimensional magnetic and gravity contact surface.
1975年、1976年格林和斯坦利发表了求二维接触面参数的一个方法。
A portion of the contact surface of the rolling component may be configured with a given surface roughness to provide sufficient traction.
该滚动构件的接触表面的一部分可被构造成具有给定的表面粗糙度以提供足够的牵引。
When analyzing structures with joints or cracks, state changing of these interfaces will affect stress and displacement of contact surface.
对这些有缝结构进行计算分析时，接缝及裂缝状态的变化会使得接触界面的范围和界面上的应力和位移不断发生变化。
The creep deformation is seen as the macroscopic consequence of the progressive destruction of cemented solid contact surface between grains.
流变变形被认为是颗粒间固体胶结接触面的破坏过程的宏观表现。
Through defining slide yield function and floating potential function of thermo-contact surface, the complementary equation of thermo-contact boundary was got.
通过定义接触面滑动屈服函数和流动势函数，得出了热接触边界的互补方程。
The shrink-fit components usually suffer fretting damage in the contact surface under rotating bending load, which remarkably reduce the life of the components.
过盈连接部件在旋转弯曲载荷下，易于在接触区域产生微动损伤，降低构件的使用寿命。
In this paper, is presented the technique of calculating the nodal values of the distributed contact forces on the contact surface from the nodal lumped contact forces.
本文建立了由节点集中接触力计算接触面上分布接触力节点值的方法，从而可顺利建立接触判据。
A model named shear slide model is presented, which can be used to simulate the mechanical property of the contact surface between the structure and its adjacent object.
提出了可以考虑初始缝隙和切向剪切滑动的“剪切滑移模型”，可以用于模拟结构与相邻物体之间接触面的力学特性。
The experimental result indicated that: in stretch process, in identical test specimen the strain value on metal substrate and contact surface are same, the mark is opposite.
实验结果表明：在拉伸过程中，同一试样中金属基体上和界面上的应变数值相同，符号相反。
This paper deals with the technique of laser cladding on contact surface of gears, micro hardness distribution, microstructure and properties of cladding and transition layer.
研究齿轮齿面激光熔覆粉末合金的工艺、显微硬度分布、熔覆层及过渡层等的金相组织及性能。
The influence of the pile type and the friction angle of the contact surface on the limit bearing capacity of the piles and the composite foundation is discussed with an example.
通过算例，讨论了桩型及桩土接触面上的摩擦角对散体材料桩及其复合地基极限承载力的影响。
U type protection: made of PVC, is closely linked to the special keel to increase the contact surface with the smallpox soft film and extended product protection, the use of time.
型保护条：采用PVC制成，紧扣在专用龙骨上以增加与天花软膜的接触面，保护并延长产品使用时间。
Regularly check whether actions of inhalation, exhalation discs are flexible, and the sealing contact surface of leader and disc is damaged, if so, should be replaced immediately.
定期检查吸入、呼出阀盘动作是否灵活，导杆及阀盘接触密封面有无损坏，如有损坏应立即更换。
The finite element method (FEM) of contact theory and eigenvalue computing is used in this thesis to solve the problem of natural modal analyzing aircraft structure with contact surface.
本文采用接触理论有限元数值方法加特征值计算的方法来解决考虑连接面固有特性计算的问题。
There clearly exists a strain intensity gradient and compression rate gradient within the country rocks so that both strain intensity and compression rate increase toward the contact surface.
热接触变质围岩内应变强度和压缩率向岩基接触面方向递增，存在较明显的应变强度梯度和压缩率梯度。
There clearly exists a strain intensity gradient and compression rate gradient within the country rocks so that both strain intensity and compression rate increase toward the contact surface.
热接触变质围岩内应变强度和压缩率向岩基接触面方向递增，存在较明显的应变强度梯度和压缩率梯度。
应用推荐