The distributions of stresses and deformations on contact surface are presented.
研究结果集中表现了接触区的变形、应力分布等情况。
Clean the floor at the contact surface positions with MEK or an equivalent solvent.
使用MEK或其它等效溶剂清洁地板上的贴合面区域。
This paper introduces an improved contour optimum design method on contact surface.
介绍一种改进的接触面外形优化设计方法。
Shear strength of most contact surface specimens decreases with large water content of soil.
各接触类型接触界面的抗剪强度随土体含水率的增大均呈下降趋势。
The energy input from arc to contact surface is a decisive factor on erosion of contact materials.
电弧对触头表面的能量输入是影响触头侵蚀量的决定因素。
"The normal value" may make the temporary on the input contact surface to revise, but does not preserve.
“标准值”可以在录入界面上作临时性修改，但不保存。
A special OPTIMESS sensor is mounted on the rim inside the tire and measures the contact surface of the tire.
特型OPTIMESS传感器被装于轮胎内侧轮沿上用于测量轮胎的接触面。
The radiating fin is designed in wave shape, in order to enlarge the radiating surface and the contact surface.
散热片设计为波浪型，增大了散热面积与接触面积。
The waviness of each contact surface of a ball bearing is the main reason which causes the ball bearing vibration.
滚动轴承零件各接触表面的波纹度是引起轴承振动的主要原因。
This paper will show you some research and application of silver technology for contact surface of rectifier wheel.
介绍了整流盘接触面涂银方式的研究和应用。
The system phase of exploitation mainly showed the system contact surface development and the procedure code design.
系统开发阶段主要说明了系统的界面开发和程序编码的设计。
A contact surface profile measurement system which is based on white-light interference measuring technique is proposed.
提出了一种基于白光干涉测量技术的接触式表面形貌测量系统。
In 1975, 1976, Green and Stanley published a method to determine parameters of two-dimensional magnetic and gravity contact surface.
1975年、1976年格林和斯坦利发表了求二维接触面参数的一个方法。
However, open-styled stairs increase the contact surface of the building and outside air, and this affect energy-saving of the building.
然而，开敞式楼梯间增加了建筑物与室外空气接触的表面积，对建筑节能有一定影响。
Lower pairs are desirable from a design standpoint since the load at the joint and the resultant wear is spread over the contact surface.
低副是从设计的角度来看是可取的，由于联合负荷以及由此产生的磨损分布在整个接触面。
A portion of the contact surface of the rolling component may be configured with a given surface roughness to provide sufficient traction.
该滚动构件的接触表面的一部分可被构造成具有给定的表面粗糙度以提供足够的牵引。
When analyzing structures with joints or cracks, state changing of these interfaces will affect stress and displacement of contact surface.
对这些有缝结构进行计算分析时，接缝及裂缝状态的变化会使得接触界面的范围和界面上的应力和位移不断发生变化。
Analysis of the physical characteristics of failure samples' contact surface verify the failure mechanism and accelerated lifetime testing.
对失效试品作表面物理分析以便分析其失效机理，验证寿命加速试验是否正常。
This also apparently reduces the contact surface between the two stacked volumes and reinforces the oblong nature of their geometrical form.
这也明显降低了两个堆叠体量之间的接触面，加强它们的长方形的几何特质。
This also apparently reduces the contact surface between the two stacked volumes and reinforces the oblong nature of their geometrical form.
同时明显降低两个堆叠的体量之间的接触面，并加强长方体的几何性质。
The creep deformation is seen as the macroscopic consequence of the progressive destruction of cemented solid contact surface between grains.
流变变形被认为是颗粒间固体胶结接触面的破坏过程的宏观表现。
Through alter the method on scraping contact surface between main spindle head and lathe frame, we may increase contact point and improve the contact rigidity.
通过改进普通车床主轴箱与床身接触面的刮削方法增加接触点，从而提高接触刚度。
Through defining slide yield function and floating potential function of thermo-contact surface, the complementary equation of thermo-contact boundary was got.
通过定义接触面滑动屈服函数和流动势函数，得出了热接触边界的互补方程。
The shrink-fit components usually suffer fretting damage in the contact surface under rotating bending load, which remarkably reduce the life of the components.
过盈连接部件在旋转弯曲载荷下，易于在接触区域产生微动损伤，降低构件的使用寿命。
Besides, the whole stability of the ball buddy is increased since that the lower surface of the added direction indicator enlarges the contact surface with ground.
此外，由于增设的方向指示器下平面扩大了与地面的接触，提高了球托的整体稳定性。
In this paper, is presented the technique of calculating the nodal values of the distributed contact forces on the contact surface from the nodal lumped contact forces.
本文建立了由节点集中接触力计算接触面上分布接触力节点值的方法，从而可顺利建立接触判据。
A model named shear slide model is presented, which can be used to simulate the mechanical property of the contact surface between the structure and its adjacent object.
提出了可以考虑初始缝隙和切向剪切滑动的“剪切滑移模型”，可以用于模拟结构与相邻物体之间接触面的力学特性。
The melting deformation area is dependent on the energy heating the contact surface, the meterial parameters and the deformation is identical with the welding probability.
探明了熔化变形面积与接触加热能量及材料性质参数有关且其变形大小与静熔焊概率大小一致。
This paper deals with the technique of laser cladding on contact surface of gears, micro hardness distribution, microstructure and properties of cladding and transition layer.
研究齿轮齿面激光熔覆粉末合金的工艺、显微硬度分布、熔覆层及过渡层等的金相组织及性能。
This paper deals with the technique of laser cladding on contact surface of gears, micro hardness distribution, microstructure and properties of cladding and transition layer.
研究齿轮齿面激光熔覆粉末合金的工艺、显微硬度分布、熔覆层及过渡层等的金相组织及性能。
应用推荐