Locally, using an analog control signal.
本地方面，使用模拟控制信号。
GAL device is used to produce control signal.
用GAL器件产生脉冲分配信号。
A new method for investigating DC-DC converters under the control signal was suggested.
提出了一种研究DC - DC电压变换器受控制信号控制的新方法。
If a droid loses contact with the control signal, it enters a stand-by hibernating mode.
一个机器人如果与控制信号失去联系，就进入待命休眠模式。
The PID control signal was modulated by fuzzy control to improve the system performance.
该方法通过模糊控制调节PID控制器输出，从而改善系统性能。
Modulation is used to control or throttle flow in response to an external control signal.
调制用于根据外部控制信号对流量进行控制或调节。
It can change the flow and cut off gas medium in the pipe by the different control signal.
对管道中气体介质按不同控制信号调节流量大小和切断。
The controller's most basic task is to generate the control signal of the steering-engine.
控制器最基本的任务就是产生控制舵机所需的控制信号。
The different control signal makes LBD to give out light with the pattern in different way.
不同的控制信号使发光二极管以不同的方式和花样显示。
The selection of the optimal threshold and the generation of bit control signal were also discussed.
分析了图像分割最佳阈值的计算方法，讨论了异色羽绒提取的信号控制方式；
The SPLL consists of calculation frequency error, updating loop middle variable, and output control signal.
该锁相环由计算频率误差、更新环路中间变量、输出控制信号组成。
Two kinds of program control signal attenuation circuits, which are used in circuit design, are introduced.
本文介绍线路设计中所应用的两种程控信号衰减电路。
The control scheme gets the switch control signal of inverter with the space voltage vector modulation technology.
系统采用空间电压矢量脉宽调制技术得到逆变器的开关控制信号。
This paper introduces a method to fast develop the word_type coureware on the basis of the control signal of scenario.
介绍一套基于脚本控制符的快速开发文字型课件的方法。
A logic element designed to act as either an adder or a subtracter in accordance with the control signal applied to it.
根据供给它的控制信号，或起加法器作用或起减法器作用的一种逻辑元件。
Call Accepted signal a control signal transmitted by the called equipment to indicate that it accepts an incoming call.
呼叫接受的信号被叫设备发出的控制信号，表明正在接收入局呼叫。
Multi-jump connection radio communication system and source station, relay station, destination station and control signal.
多跳连接无线通信系统及源站，中继站，目的站和控制信号。
The core of this system is IPC and the distributed remote moulds are used for the date acquisition and control signal sending.
系统以工控机为核心，采用分布式远程模块完成数据的采集与控制信号的发送。
The rhythms output of the proposed system can be used as control signal for music fountain and lightening for synchronization.
经处理得到的输出音乐节奏和音频能量作为控制信号调节音乐喷泉的花型变换节奏以及水柱高度。
Intermediate relay is a type of control undervoltage relay which is used to add the amount of control signal or amplify the signal.
在自动化控制系统中采用大量的中间继电器，其工作的可靠性对控制系统工作的可靠性是至关重要的。
Numatics electronic proportional regulators quickly and accurately adjust output pressure in relation to an electrical control signal.
纽曼帝克电子比例调节快速，准确地调整输出关系的压力，以电控信号。
The software mainly processes the rotate speed signal of the crankshaft and camshaft position signal to export ignition control signal.
软件部分主要对曲轴速度信号、凸轮轴基准信号等进行处理计算，输出点火控制信号。
This paper focuses on the control algorithm of this system, the algorithm generate the control signal of solenoid valves, which manage the image display.
着重讨论了气泡成像系统的控制算法，并根据图像信息产生电磁阀的控制信号，完成图像显示。
But in the Grex system, vehicles will be able to act as relay stations, bouncing a control signal from the mother ship to the networked submarines over many miles.
但在Grex的系统内，水下机器人将充当一个中继站，将来自母船的控制信号传给连网的其他机器人，这种方式下的传输距离可达到数英里。
The kernel functions such as test signal storage, video timing signal generation and systems control signal generation are realized by field programmable gate array(FPGA).
采用现场可编程门阵列（FPGA）完成测试图案数据存储、各种视频标准时序产生及系统控制信号产生等核心功能。
The difference of output voltage of inverter and 220v is set as control signal, controller change the PWM signal to regulate buck-boost converter and three-phase rectifier.
以逆变器输出的电压和220v的差值作为控制信号。设计控制器根据控制信号改变直流变换器和三相可控整流的PWM控制信号。
The methods are presented for generation of control signal, determination of collect interval, estimation of directional function and revision of directional wave spectrum.
介绍了驱动信号的生成、采样间隔的确定、方向函数的估计和方向谱的修正方法。
The methods are presented for generation of control signal, determination of collect interval, estimation of directional function and revision of directional wave spectrum.
介绍了驱动信号的生成、采样间隔的确定、方向函数的估计和方向谱的修正方法。
应用推荐