But in the Grex system, vehicles will be able to act as relay stations, bouncing a control signal from the mother ship to the networked submarines over many miles.
但在Grex的系统内，水下机器人将充当一个中继站，将来自母船的控制信号传给连网的其他机器人，这种方式下的传输距离可达到数英里。
Now, users could write shell scripts; store and export information in variables; control file descriptors; control signal handling, for loops, and case statements; and so much more.
到这时，用户可以编写shell脚本，在变量中存储信息和导出信息，控制文件描述符，控制信号处理，使用for循环和case语句，以及其他大量功能。
Locally, using an analog control signal.
本地方面，使用模拟控制信号。
A new method for investigating DC-DC converters under the control signal was suggested.
提出了一种研究DC - DC电压变换器受控制信号控制的新方法。
If a droid loses contact with the control signal, it enters a stand-by hibernating mode.
一个机器人如果与控制信号失去联系，就进入待命休眠模式。
The PID control signal was modulated by fuzzy control to improve the system performance.
该方法通过模糊控制调节PID控制器输出，从而改善系统性能。
Modulation is used to control or throttle flow in response to an external control signal.
调制用于根据外部控制信号对流量进行控制或调节。
The third and a fourth voltage signals are generated in response to a second control signal.
所述第三和第四电压信号是响应于第二控制信号而生成的。
An additional antibody specific to the detection antibody can be used to produce a control signal.
另外的一个能特异性作用于检测抗体的抗体被用来产生控制信号。
The pulse width of the key control signal SPWM is acquired by the sampling method based on median rule.
关键的控制信号SPWM的脉冲宽度采用中值规则采样法来求取。
The enhanced control signal quickly brings the output voltage up to at least the minimum desired level.
增强的控制信号将输出电压快速增加到至少最小期望电平。
The calibration method of the original BPL time service broadcast control signal is analyzed and studied.
论文对原BPL授时发播控制信号的定标方法进行了分析研究。
Two kinds of program control signal attenuation circuits, which are used in circuit design, are introduced.
本文介绍线路设计中所应用的两种程控信号衰减电路。
The control scheme gets the switch control signal of inverter with the space voltage vector modulation technology.
系统采用空间电压矢量脉宽调制技术得到逆变器的开关控制信号。
One of the key problems in real time turning error compensation system is how to overcome the lag of control signal.
车削误差实时补偿控制中的关键问题之一是如何有效克服控制信号的滞后。
A logic element designed to act as either an adder or a subtracter in accordance with the control signal applied to it.
根据供给它的控制信号，或起加法器作用或起减法器作用的一种逻辑元件。
The switching circuit determines whether to apply the power supply voltage to a chip in response to the control signal.
开关电路响应控制信号确定是否向芯片施加电源电压。
The core of this system is IPC and the distributed remote moulds are used for the date acquisition and control signal sending.
系统以工控机为核心，采用分布式远程模块完成数据的采集与控制信号的发送。
The voltage comparison circuit generates a control signal based on a comparison between the first voltage and the second voltage.
电压比较电路基于第一电压和第二电压之间的比较产生控制信号。
Intermediate relay is a type of control undervoltage relay which is used to add the amount of control signal or amplify the signal.
在自动化控制系统中采用大量的中间继电器，其工作的可靠性对控制系统工作的可靠性是至关重要的。
The model was realized by using standard data acquisition modules, control signal output modules and reliable flowrate control valves.
应用成型的计算机数据采集和控制模块及稳定可靠的流量控制部件，实现了各相流量的自动控制过程。
The software mainly processes the rotate speed signal of the crankshaft and camshaft position signal to export ignition control signal.
软件部分主要对曲轴速度信号、凸轮轴基准信号等进行处理计算，输出点火控制信号。
A second latch circuit latches the first and second voltage signals and outputs a second output signal in response to a third control signal.
第二锁存电路锁存所述第一和第二电压信号，并且响应于第三控制信号而输出第二输出信号。
A first latch circuit latches the third and fourth voltage signals, and outputs a first output signal in response to the second control signal.
第一锁存电路锁存所述第三和第四电压信号，并且响应于该第二控制信号而输出第一输出信号。
By adjustment to control signal, systems might realize variable voltage, variable frequency, steady voltage, steady frequency closed loop control.
通过对控制信号的调整，系统可实现变压、变频、稳压、稳频的闭环控制。
By the hydraulic system test, we obtained the experimental data, such as the curves of the beam movement, pressure and valve's control signal and flow.
通过陶瓷压砖机液压系统试验，得到了各工作循环时的动梁运动曲线、主缸压力曲线、系统压力曲线和各伺服比例阀的控制信号曲线等试验数据。
The high frequency gain of the regulator is limited to suppress the high frequency oscillation of the control signal while assigning the closed-loop poles.
在配置闭环极点的同时，对调节器的高频增益加以限制，以减弱控制信号的高频振荡。
When the output intensity of a laser is changed, a feedback control signal processed by a digital PID regulator is used to control the current of a laser tube.
利用输出光强变化，通过数字PID调节器反馈控制激光管电流可获得较为稳定的激光输出。
If the output voltage is less than the predetermined voltage level, the switching circuit portion transmits an enhanced control signal to the regulation circuit.
如果输出电压小于预定的电压电平，则开关电路部分将增强的控制信号传输到调节电路。
If the output voltage is less than the predetermined voltage level, the switching circuit portion transmits an enhanced control signal to the regulation circuit.
如果输出电压小于预定的电压电平，则开关电路部分将增强的控制信号传输到调节电路。
应用推荐