This process has characteristics of simple operation, low reaction temperature, no burnt loss and low production cost.
此工艺操作简单,反应温度低,同时避免了金属的烧损,可大大降低合金生产成本。
Properly selected reaction temperature can suppress the secondary reactions and enhance the production of propene and ethene.
选择适宜的反应温度条件能够有效地抑制副反应,从而提高丙烯、乙烯的总产率。
The results showed that both carbon conversion and gas composition were strongly influenced by the catalyst content and reaction temperature.
实验结果表明,催化剂添加量和气化温度对碳转化率和煤气组成的影响最为显著。
Thermostablility and the optimal reaction temperature make the enzyme an excellent model in the research of the structure and function of the protein.
高度的耐热性以及较高的最适反应温度使得这些酶类成为研究蛋白质结构与功能关系以及蛋白质耐热机制的极好的模型材料。
Compared with naphtha, when the yield of ethylene is similar, vegetable oil needs lower reaction temperature, which has important significance for industrial application.
与石脑油相比,在乙烯收率相近时,植物油所需的裂解温度较低,因而具有重要的工业应用价值。
The optimum reaction temperature and time were given.
给出了最佳反应温度和反应时间。
Polymerization speed increases with the increase of reaction temperature.
聚合反应温度提高,聚合速率加快。
The proper reaction temperature and time are determined in the experiment.
通过试验,确定了合适的反应温度和反应时间。
Static adsorption showed that the adsorption effect was related to reaction temperature.
静态吸附结果表明,反应温度对纤维的吸附效果有影响。
The influence of reaction temperature and gas flow rate on purification efficiency was studied.
研究反应温度和气体流量对磷化氢净化效率的影响。
The influence of reaction temperature and reaction time on degree of esterification were investigated.
通过正交实验考察了反应时间、反应温度对聚乙烯醇酯化程度的影响。
The effects of the reaction temperature, air quantity and reaction time on asphalt quality are studied.
考察了反应温度、风量和反应时间对油浆氧化沥青性能的影响。
A comparative study showed that the yield was low when the reaction temperature was too low or too high.
反应温度过高或过低,碳纳米管的产率都很低。
Effects of reaction time, ozone concentration and reaction temperature on oxidation of HDPE were studied.
研究了反应时间、臭氧浓度和反应温度对HDPE氧化程度的影响。
The results showed that the thickness of hollow fibers increased with reaction temperature and reaction time.
实验结果显示空心碳化矽纤维壁的厚度会随著反应时间与温度的增加而增加。
The influence which the reaction time and the reaction temperature had made to adsorption capacity was studied.
在此基础上研究和探讨了反应时间、反应温度对吸附剂吸附能力的影响。
The effects of monomer concentration, initiator, reaction temperature and time on copolymerization were studied.
考察了单体浓度,引发剂浓度,反应温度和时间等对共聚反应的影响。
The factors which affect the reaction, such as reaction temperature and raw material ratio, have been discussed.
有关反应温度、原材料配比等因素对反应的影响都进行了详尽的研究。
The influences of reaction temperature and amount of sulfonating agent on sulfonating reaction were investigated.
考察了反应温度、磺化试剂用量对磺化反应的影响。
The effects of reaction temperature and chloride concentration on the deposition rate of metal are also discussed.
同时还讨论了反应温度和氯化物浓度对金属沉积速度的影响。
Effects of reaction temperature, reaction time, solvent, catalyst and its amount on prepolymerization was studied.
探讨了反应温度、反应时间、溶剂、催化剂及用量对预聚反应的影响。
In this paper the effect of sucrose concentration and reaction temperature on the sucrose hydrolysis were studied.
考察了蔗糖水溶液的浓度及反应温度对蔗糖水解反应的影响。
The effects of organic promoter, catalyst amount, reaction temperature and time on the synthesis were investigated.
考察了有机助剂、催化剂用量、反应温度、反应时间等因素对反应的影响。
The catalysts, mechanisms, effects of reaction temperature and reactant flow rate on the reaction were also described.
文中简介了催化剂、反应机理,以及反应温度和进料流率对反应的影响。
The influence of reaction temperature, used solvents and catalysts on the prepolymerization reaction was investigated.
研究了反应温度、溶剂、催化剂及用量对预聚反应的影响。
The influence of catalysts, solvents, reaction temperature, dosage of the reactants on the co-oxidation were discussed.
探讨了催化剂、溶剂、反应温度及反应物用量等对共氧化行为的影响。
The effect of vitriol excess coefficient, reaction temperature and reaction time on the leaching ratio has been studied.
其次是硫酸浸取,研究了硫酸过量系数、酸浸温度和酸浸时间对铁的浸出率的影响。
And discussed the reaction temperature, the ratio of reagent, the solvent concentration, reaction time on the production rate.
并讨论了反应温度、反应物的摩尔比、溶剂的用量、反应时间对产率的影响。
The Effect of sparking energy, reaction temperature and electrode distance on the powder size, shape and yield was investigated.
研究了脉冲能量、反应温度和电极间距等工艺因素对镍磷合金粉体尺寸、形貌及收得率的影响。
The Effect of sparking energy, reaction temperature and electrode distance on the powder size, shape and yield was investigated.
研究了脉冲能量、反应温度和电极间距等工艺因素对镍磷合金粉体尺寸、形貌及收得率的影响。
应用推荐