Static adsorption showed that the adsorption effect was related to reaction temperature.
静态吸附结果表明，反应温度对纤维的吸附效果有影响。
The effects of the reaction temperature, air quantity and reaction time on asphalt quality are studied.
考察了反应温度、风量和反应时间对油浆氧化沥青性能的影响。
A comparative study showed that the yield was low when the reaction temperature was too low or too high.
反应温度过高或过低，碳纳米管的产率都很低。
Effects of reaction time, ozone concentration and reaction temperature on oxidation of HDPE were studied.
研究了反应时间、臭氧浓度和反应温度对HDPE氧化程度的影响。
The results showed that the thickness of hollow fibers increased with reaction temperature and reaction time.
实验结果显示空心碳化矽纤维壁的厚度会随著反应时间与温度的增加而增加。
The influence which the reaction time and the reaction temperature had made to adsorption capacity was studied.
在此基础上研究和探讨了反应时间、反应温度对吸附剂吸附能力的影响。
The effects of monomer concentration, initiator, reaction temperature and time on copolymerization were studied.
考察了单体浓度，引发剂浓度，反应温度和时间等对共聚反应的影响。
The factors which affect the reaction, such as reaction temperature and raw material ratio, have been discussed.
有关反应温度、原材料配比等因素对反应的影响都进行了详尽的研究。
The effect of phase reaction temperature of salt roasting and other factors on vanadium recovery is investigated.
研究了氯化钠焙烧中相反应温度及其它与钒转化浸出率的有关因素。
The influences of reaction temperature and amount of sulfonating agent on sulfonating reaction were investigated.
考察了反应温度、磺化试剂用量对磺化反应的影响。
The effects of reaction temperature and chloride concentration on the deposition rate of metal are also discussed.
同时还讨论了反应温度和氯化物浓度对金属沉积速度的影响。
The effects of organic promoter, catalyst amount, reaction temperature and time on the synthesis were investigated.
考察了有机助剂、催化剂用量、反应温度、反应时间等因素对反应的影响。
The catalysts, mechanisms, effects of reaction temperature and reactant flow rate on the reaction were also described.
文中简介了催化剂、反应机理，以及反应温度和进料流率对反应的影响。
The influence of reaction temperature, used solvents and catalysts on the prepolymerization reaction was investigated.
研究了反应温度、溶剂、催化剂及用量对预聚反应的影响。
The influence of catalysts, solvents, reaction temperature, dosage of the reactants on the co-oxidation were discussed.
探讨了催化剂、溶剂、反应温度及反应物用量等对共氧化行为的影响。
The effect of vitriol excess coefficient, reaction temperature and reaction time on the leaching ratio has been studied.
其次是硫酸浸取，研究了硫酸过量系数、酸浸温度和酸浸时间对铁的浸出率的影响。
The results showed that reaction temperature should be low at first, and then increasing temperature to complete reaction.
结果显示：在较低温度下，通过较长的反应时间可以使反应更好地向设计方向进行。
And discussed the reaction temperature, the ratio of reagent, the solvent concentration, reaction time on the production rate.
并讨论了反应温度、反应物的摩尔比、溶剂的用量、反应时间对产率的影响。
BET specific surface area is influenced very much by the interaction of concentration of sodium silicate and reaction temperature.
硅酸钠浓度与反应温度之间的交互作用，对沉淀二氧化硅的BET比表面积影响显著。
Technological process and formula of the coating is presented and effects of reaction temperature on coating performance discussed.
介绍了该涂料的生产工艺和配方，讨论了反应温度对其性能的影响。
The influence of reaction temperature, initiator level. reaction time and rubber level on the graft polymerization was investigated.
考查了反应温度、引发剂用量、反应时间和胶用量对接枝共聚反应的影响。
The influences of medium alkalinity, solvents, reaction temperature and reaction time on the yield of the product were investigated.
讨论了介质碱性、溶剂、反应温度和反应时间等工艺条件对产物收率的影响。
The product distribution could be improved by using higher reaction temperature to improve atomization and gasification of feedstock.
增大剂油比，提高反应温度可以改善原料油的雾化、汽化效果，对改善裂化产物的产品分布有利。
The effect of acid-alcohol ratio, acidity of catalyst, amount of catalyst, reaction time, and reaction temperature were investigated.
考察了醇酸比，催化剂酸度，催化剂用量，反应时间，反应温度对酯化产率的影响。
With the increase of hydrothermal reaction temperature, the diameter of the particles accreted and size distribution forms inhomogeneous.
随着水热温度的升高，粒子的直径随之增大，而形貌和尺寸的均一性则有所降低。
Effects of reaction temperature, oxygen concentration, catalyst dosage and reaction time on oxidation of benzyl alcohol were investigated.
考察了反应温度、氧浓度、催化剂用量以及反应时间对苯甲醇氧化的影响。
Discussed the influence to the retention rate by the dosage of coupling agents, the reaction time, the reaction temperature in modification.
讨论了轻质碳酸钙改性过程中偶联剂用量、反应时间、反应温度等因素对留着率的影响。
The results showed that both carbon conversion and gas composition were strongly influenced by the catalyst content and reaction temperature.
实验结果表明，催化剂添加量和气化温度对碳转化率和煤气组成的影响最为显著。
The influence of acrylic acid and tetradecyl alcohol, amount of catalyst and inhibitor, reaction temperature, reaction time were investigated.
探讨了丙烯酸与十四醇摩尔比，催化剂和阻聚剂的用量、反应温度及反应时间对酯化反应的影响。
The influence of acrylic acid and tetradecyl alcohol, amount of catalyst and inhibitor, reaction temperature, reaction time were investigated.
探讨了丙烯酸与十四醇摩尔比，催化剂和阻聚剂的用量、反应温度及反应时间对酯化反应的影响。
应用推荐