The research can be used as a theoretical foundation of on-line measurement and control for cold ring rolling process.
此研究为环件冷轧过程在线测量和控制提供了理论依据。
The rotational speed of the main roll of a profile ring mill is critical for insuring the success of its rolling process.
合理的主辊转速是保证异形环件顺利轧制的重要因素。
The thin slab continuous casting and rolling process is a reforming technology in the steel industry, and it should be mastered and promoted step by step in China.
薄板连铸连轧工艺是钢铁工业的重大变革技术，要切实掌握和逐步推广。
Good agreement was achieved between calculated and production data, which proves the validity of this method and provides guidelines for optimal design of hot rolling process.
工艺优化计算结果与现场生产数据吻合良好，验证了工艺优化设计的有效性，从而为热轧最优工艺设计提供指导。
The kinematical analysis in rolling process.
辗扩过程运动学分析。
The operation shows that the rolling process is feasible.
经生产实践证明，其工艺可行。
Especially for aluminum alloy products of hot rolling process.
特别适用于铝合金制品之热轧工艺加工。
The system pressure had very big fluctuation during rolling process.
在轧钢过程中系统压力出现大幅度波动。
Waste water treatment is one of the difficulties in steel rolling process.
冷轧废水处理是轧钢工艺中的难点之一。
The model would be used for design of the cold ring rolling process controller.
模型已用于冷轧环工艺控制器的设计。
The steady heat balance state of the tire in the rolling process was researched.
研究轮胎滚动过程中的稳态热平衡状态。
The rolling process of corrugated waist rail is simulated by explicit dynamic FEM.
利用显示动力学有限元分析方法，模拟了波纹轨腰钢轨的轧制过程。
A brick element re-meshing technique was presented for shape-metal rolling process.
提出了一种适用于型钢轧制及其类似过程的六面体网格重构方法。
It has developed the parametric residual deforming FEA in crankshaft rolling process.
二次开发了参数化曲轴滚压加工残余变形的有限元分析。
Bonded hard ferrite magnets were prepared by rolling process using domestic material.
利用国产原料制备了压延取向粘结铁氧体磁体。
One problem of the traditional casting-rolling process is lower production efficiency.
常规连续铸轧工艺存在铸轧速度低、生产率不高的问题。
The hot-rolling process and parameters for JL510L automobile beam steel are introduced.
介绍了唐山建龙实业有限公司JL510L汽车大梁钢的热轧工艺及其参数控制。
In the rolling process of plate stripe. it is difficult to detect the stripe depth on line.
在板材纹路压制加工中，纹路深度的在线检测十分困难。
The rolling process of medium plate was analyzed with the explicit dynamic finite element method.
采用动态显式有限元法对中厚板轧制过程进行了分析。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
It is significant to study the contact area in rolling process and simplify model of finite element.
对研究花键冷滚压成形过程中的接触面积和有限元模型的简化具有重要的意义。
The simplified numerical simulation of the rolling process from a flat plate into a single curvature plate.
用三辊机将平面钢板辊成单曲率板加工过程的数值模拟。
Simulation results provide effective data to ensure the stability of operation in the casting-rolling process.
此模拟结果可以为控制铸轧过程的稳定提供有效的数据。
Based on the feature of plate rolling process, pass correction based on gray relational grade is put into forward.
基于中厚板的轧制特点，提出了基于灰色关联度的道次修正算法。
This article introduces how to select and apply statistical methods in quality management in steel rolling process.
介绍了在轧钢生产的质量管理工作中如何选择和应用统计技术。
The reasonable rolling schedule is an important guarantee to make the rolling process achieve the optimum conditions.
合理的轧制规程是使轧制过程达到最佳状态的重要保证。
The depth of zebra veins defect is controled effectively through adjusting cast-rolling process and operation method.
通过对铸轧工艺、实际操作的调整优化，使“斑马纹”缺陷的深度得到有效控制。
For the bar and wire endless rolling process, the welded area is required to have similar properties as the base metal.
棒线材的无头轧制工艺，要求焊接部位与基体具有同样的性能。
A mathematical model for thin strip cold and temper rolling process has been developed using influence function method.
利用影响函数法，开发了适用于冷轧薄带与平整轧制过程的数学模型。
A mathematical model for thin strip cold and temper rolling process has been developed using influence function method.
利用影响函数法，开发了适用于冷轧薄带与平整轧制过程的数学模型。
应用推荐