Especially for aluminum alloy products of hot rolling process.
特别适用于铝合金制品之热轧工艺加工。
Good cooling performance, can timely carry heat generated in the rolling process.
良好的冷却性能，能及时的携带轧制过程产生的热量。
The rolling process of corrugated waist rail is simulated by explicit dynamic FEM.
利用显示动力学有限元分析方法，模拟了波纹轨腰钢轨的轧制过程。
It has developed the parametric residual deforming FEA in crankshaft rolling process.
二次开发了参数化曲轴滚压加工残余变形的有限元分析。
Bonded hard ferrite magnets were prepared by rolling process using domestic material.
利用国产原料制备了压延取向粘结铁氧体磁体。
In the rolling process of plate stripe. it is difficult to detect the stripe depth on line.
在板材纹路压制加工中，纹路深度的在线检测十分困难。
The rolling pass is one of the important technological parameters of the ring rolling process.
在环件轧制过程中，孔型是环件轧制的重要工艺参数之一。
A important process, spinning rolling process is introduced in machining the guide cloth roller.
分析了导布辊辊筒加工中的一个重要工艺辘圆工艺。
The rolling process of medium plate was analyzed with the explicit dynamic finite element method.
采用动态显式有限元法对中厚板轧制过程进行了分析。
This machine is the use of annular-shaped tube on the shortage of cold rolling process equipment.
本机是利用环孔形对荒管进行冷态轧制的工艺设备。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
It is significant to study the contact area in rolling process and simplify model of finite element.
对研究花键冷滚压成形过程中的接触面积和有限元模型的简化具有重要的意义。
The electronic workpiece acceleration ensures the quality of the decisive start of the rolling process.
电子控制的工件驱动装置确保了最开键的滚轧起始阶段的质量。
The simplified numerical simulation of the rolling process from a flat plate into a single curvature plate.
用三辊机将平面钢板辊成单曲率板加工过程的数值模拟。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
Simulation results provide effective data to ensure the stability of operation in the casting-rolling process.
此模拟结果可以为控制铸轧过程的稳定提供有效的数据。
Based on the feature of plate rolling process, pass correction based on gray relational grade is put into forward.
基于中厚板的轧制特点，提出了基于灰色关联度的道次修正算法。
This article introduces how to select and apply statistical methods in quality management in steel rolling process.
介绍了在轧钢生产的质量管理工作中如何选择和应用统计技术。
The reasonable rolling schedule is an important guarantee to make the rolling process achieve the optimum conditions.
合理的轧制规程是使轧制过程达到最佳状态的重要保证。
The depth of zebra veins defect is controled effectively through adjusting cast-rolling process and operation method.
通过对铸轧工艺、实际操作的调整优化，使“斑马纹”缺陷的深度得到有效控制。
For the bar and wire endless rolling process, the welded area is required to have similar properties as the base metal.
棒线材的无头轧制工艺，要求焊接部位与基体具有同样的性能。
A mathematical model for thin strip cold and temper rolling process has been developed using influence function method.
利用影响函数法，开发了适用于冷轧薄带与平整轧制过程的数学模型。
The output and quality of metal plate and strip are heavily affected by electromechanical vibration in rolling process.
轧钢过程中的负荷扰动容易激起机电振动，这严重影响板带材的产量和质量。
For its simple structure, low cost, high reliability and control accuracy, this system can be used in steel rolling process.
本系统结构简单、成本低、可靠性好、控制精度高，能够满足轧钢工艺要求。
The model directly simulate the blade material and rolling conditions, the key factors in rolling process for the first time.
模型首次直接对影响辊压过程的关键因素即基材材质和辊压条件进行了模拟分析。
The effect of rolling oil foaming on product quality in the rolling process of cold rolling aluminum sheet strip was discussed.
通过分析冷轧铝板带材轧制过程中轧制油起泡对产品质量的影响，阐述了轧制油起泡的原因，并提出了针对轧制油起泡的对策。
The rolling process is efficient and economical to other types of processes, such as explosive cladding, diffusion welding, etc.
采用轧制工艺生产双金属产品，优于爆炸焊、扩散焊等工艺，是一种十分经济实用的方法。
The torsional vibration often occurs during the rolling process, which will affect the condition of equipment and the production.
轧机扭振是轧钢过程中经常出现的问题，给设备和生产造成不良的影响。
Through these aspects research, we can have the profound understanding to the Pickling-CC Rolling process and the board shape system.
本课题结合了涟源冷轧厂的现场实际情况，对酸洗-冷连轧的工艺制度进行了研究。
A semi-endless rolling process is possible in combination with, arranged downstream of the rolling mill or upstream of the downcoilers.
一个半无穷式的轧制过程可以和飞剪机结合在一起，可以安排在轧机的后面或者后部卷板机的前面。
应用推荐