Any tumor may compress regions of the brain and increase internal pressure, upsetting the organ's delicate functional balance.
任何肿瘤都会挤压大脑某些区域，增加内部压力，从而打破该器官的微妙运作平衡。
The tinier the bubbles, the greater their internal pressure.
泡泡越小，内部压强越大。
The minimum thickness was mainly determined by the maximal internal pressure.
影响最小厚度的主要因素是最大内部压力。
Also, the formulas of allowable internal pressure for various pressure vessels are proposed.
并在此基础上推导了不同压力容器的许可压力公式。
An increase in the temperature of a gas confined in a container will lead to higher internal pressure within the gas.
提高密闭容器内气体的温度会使气体的内压升高。
It also compares the calculation methods of internal pressure load in the new standards with that in the old standards.
同时还对新旧标准套管内压载荷计算方法进行了对比分析。
In the range of research, the tubing failure is not strength calculation problem under internal pressure and axial load.
在所研究的范围内，得出了内压和轴力作用下，油管失效不是油管强度不足的结论。
This paper deals with creep deformation and stresses of a spherical pot under high temperature and uniform internal pressure.
本文对高温、均匀内压作用下球罐的蠕变变形和应力进行了探讨。
In the process of tube hydro forming, the tube changes its shape under combined internal pressure and axial compressive load.
管材内压液力成形过程中，管坯在内压与轴向压力的共同作用下发生变形。
We fitted the experiment's data and obtain the elastic property curves of air spring with different standard internal pressure.
将获取的实验数据进行拟合从而得出空气弹簧在不同标准内压下的弹性特性曲线。
This paper describes a design procedure of spherical shells with nozzles subjected to internal pressure based onthe limit analysis.
在塑性极限分析的基础上，本文提出受内压球壳开孔接管的一种整体补强设计方法。
This modification of the formula shows that the formula of ductile burst internal pressure strength with Capped-Open condition is valid.
这一修正结果证明了两端开口的韧性爆裂抗内压强度公式是可靠的。
The basis of static pressure test for vessels under external pressure and vacuum vessels being done with internal pressure is elaborated.
阐述了对外压容器和真空容器以内压进行压力试验的理论依据和合理性。
According to the theory of stress analysis, the intensity design of the thin-skinned internal pressure cylinder is analyzed in this article.
运用应力分析理论进行了内压薄壁圆筒的强度设计。
Vessel parts subject to different internal pressure on both sides shall be designed to withstand the most severe combination of the pressures.
容器两侧承受不同内部压力的部件需设计为能经受最大整体压力。
Based on the theory of plasticity, the variety rule of internal pressure and axial force in the process of thin tube bulge forming is studied.
采用塑性变形理论研究了薄壁管液压胀形过程中轴向载荷与内压力的变化情况。
By using the elastoplastic finite element method, mechanical model for wear tension and internal pressure resistance of casing joints is set up.
采用弹塑性有限元方法，建立了套管接头磨损拉伸与抗内压的有限元力学模型。
A clogged pore can only stand so much internal pressure before its walls break, allowing the oil and bacteria to seep under the surrounding skin.
一个堵塞的毛孔的承载量是有限的，当压力过大时毛壁会破裂，油脂和细菌会渗漏到附近的皮肤上。
Further, the apparatus comprises a control means for simultaneously controlling the channel valve and the internal pressure of the second chamber.
设备进一步地包括用于同时控制通道阀和第二室的内部压力的控制装置。
It was an effective method in suppressing the internal pressure of Ni MH battery by adding the catalyst for oxygen reduction into the MH electrode.
在贮氢电极中添加氧还原催化剂是一种有效降低电池内压的方法。
Finally, the simulation results are verified, and the optimal internal pressure forming curve is built as the reference for the practical tube bending.
最后对模拟结果进行了试验验证，并建立了可供实际推弯工艺参考的最佳内压力成形曲线图。
The critical velocity of the infinite long sandwich shell to moving internal pressure is studied using sandwich shell theory and elastodynamics theory.
基于夹层壳理论和三维弹性动力学理论，研究了无限长夹层圆柱壳在移动内压作用下的临界速度。
At the same charge condition, the larger mass ratio of positive and negative active materials is, the more gas produces, the higher internal pressure is.
相同的充电条件下，正极与负极的活性物质质量比越大，产生的气体越多，内压越高；
It was concluded that high internal pressure was caused by oxygen evolution of positive electrode and slow reducing rate of oxygen in negative electrode.
由此可以判定，内压升高的原因在于正极的析氧及负极氧还原速度的缓慢。
The research proves that the internal pressure due to the axial compressive stress and the circumferential membrane causes the buckling of the tank wall.
研究证实：罐壁竖直轴向压应力和由内压（静水和动水压力叠加）所产生的罐壁环向拉应力共同导致罐壁失稳，发生弹塑性屈曲变形；
A test and pressure relief valve should be installed to assure relief of internal pressure prior to servicing and as a visual indication of trap operation.
应该安装一个测试和压力安全阀，确保内部压力能够在维修前得到释放，并作为疏水阀工作的直观显示。
Based on the netting theory for the filament-wound structure, the balanced equation of the filament-wound conical case under internal pressure was derived.
以纤维缠绕结构的网格理论为基础，建立了纤维缠绕圆锥壳体在内压作用下的平衡方程。
The present paper is concerned with a problem of limit analysis of thin cylindrical shell with closed ends and different thicknesses under internal pressure.
本文研究充内压端封闭异厚度薄圆柱壳的极限分析问题。
The present paper is concerned with a problem of limit analysis of thin cylindrical shell with closed ends and different thicknesses under internal pressure.
本文研究充内压端封闭异厚度薄圆柱壳的极限分析问题。
应用推荐