Direct metal forming based on plasma arc welding is a novel rapid prototyping process.
基于等离子弧焊的直接金属成形方法是一种新型的快速成形工艺。
The plasma arc forming can also decrease the residual stresses caused in the mechanical processes, which can be of great significance in preventing rebounding.
等离子电弧加热弯曲成形还可以降低机械加工引起的残余应力，有效减少回弹。
The working principle, structure and parameters design of plasma arc generator for heat treatment are described. Experiment has shown that it has good effect on partial surface hardening.
论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。试验证明这种发生器对材料的表面局部硬化非常有效。
Nano-metal nickel powder was prepared by plasma arc spraying method.
利用等离子体法制备金属纳米镍粉。
Welding equipment includes automatic plasma arc and TIG hardfacing machines.
焊接设备包括自动等离子弧和TIG表面硬化机械设备。
The NC flame and plasma arc cutting is an advanced heating cutting technique.
数控火焰等离子切割是一种先进的热切割技术。
Research on micro-plasma arc welding of Co-Cr alloy metal in oral cavity repair;
探讨了以手工方式进行铸造钴铬合金口腔修复材料微束等离子电弧焊的可行性。
This generates a plasma arc that evaporates material from the ablative device (50).
这产生使烧蚀装置(50)的材料蒸发的等离子弧。
For duplex stainless steel thermal cutting shall be limited to the plasma arc method.
对双相不锈钢进行热切割应该仅限于等离子弧切割方法。
A novel variable polarity plasma arc welding (VPPAW) power supply is introduced in this paper.
介绍了所研制的具有自调整换向功能的大功率变极性等离子弧焊接电源。
The result of developing SCR power supply for pulse plasma arc welding is introduced in this paper.
本文介绍了可控硅脉冲等离子弧焊电源的研制成果。
A plasma torch's height control system which is based on plasma arc voltage measuring is introduced.
设计了一种基于等离子电弧电压检测的割炬高度控制系统。
The article discussed the feasibility of micro-plasma arc welding Co-Cr alloy for oral cavity repair.
试验研究了钴铬合金口腔修复材料微束等离子弧焊的可行性。
Heat source device with plasma arc quenching is of great capacity for its high thermal efficiency and low cost.
等离子弧淬火热源装置热效率高，成本低，有巨大的发展潜力。
Keyhole stability during plasma arc welding welding process is critical to the process stability and weld quality.
在穿孔等离子弧焊接过程中，小孔稳定性对焊接过程的稳定和优质的焊缝成形是非常关键的。
In variable plasma arc welding of aluminum, the behavior of variable polarity plasma arc is effected by pilot arc.
在铝合金变极性穿孔焊接的工艺中，维弧对变极性电弧的行为有着重要影响。
This paper briefly introduces the principle, the advantages, and the use of plasma arc surface hardening technology.
本文首先简要介绍了等离子弧表面强化处理技术的原理、优点和用途。
Welding equipment includes automatic plasma arc and TIG hardfacing machines. Only a few typical machines are shown here.
焊接设备包括自动等离子弧和TIG 表面硬化机械设备。在此只展示少数典型设备。
Abstract: The working principle, structure and parameters design of plasma arc generator for heat treatment are described.
文摘：论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。
This work may be as a useful tool for the understanding of the parameters matching and process optimization in plasma arc welding.
本文的工作对于等离子弧焊接工艺参数的匹配及其过程的优化有重要的指导意义。
To reduce the kerf width and to improve the kerf quality, the experiments of ceramic cutting with water constricted plasma arc are carried out.
为减小切口宽度，提高切口质量，进行了水再压缩等离子弧切割陶瓷实验研究。
Welded pipe that bended by hot bending method with a set of specific die and welded by plasma arc welding method was used as tubular blank of SPF.
采用焊管作为管坯 ，焊管弯曲采用专用模具热弯 ，焊接采用等离子弧焊。超塑成形采用多层模结构 ，用模具来控制波形。
The influence of the Angle between laser beam and plasma arc beam on the precision of a deposited layer was analyzed through experimental studies.
通过实验研究分析了激光束与等离子束复合角度对熔积层精度的影响规律。
The relationship between the keyhole behavior and arc light emission flux is studied by spectroscopic method in plasma arc welding of stainless steel.
针对不锈钢穿孔等离子弧焊过程，熔池小孔的特征行为与弧光光谱辐射强度之间的关系进行了光谱试验研究。
On the basis of the characteristics of pulse plasma arc welding, a feedback control system has been developed for controlling tne penetration of welds.
本文根据脉冲等离子弧焊接的特点，研制了一种反馈控制系统，用以控制焊缝的焊透质量。
The effects of laser on plasma arc beam, welding depth and width of deposition pool in the hybrid plasma-laser rapid manufacturing is investigated by tests.
通过试验研究了等离子激光复合快速制造中激光对等离子弧柱形貌、熔积成形时的熔深和熔宽等的影响。
A plasma arc loudspeaker or plasma-dynamic loudspeaker is a loudspeaker that creates sound by varying air pressure through a corona discharge or electric arc.
等离子弧喇叭，又名等离子动态喇叭，是一种通过电晕放电或电弧改变空气压力发声的喇叭。
In the present study, tungsten oxide nanorods were prepared by a plasma arc gas condensation technique where a gas nozzle was introduced to provide blowing gas.
本研究以电浆电弧为加热源蒸发钨靶材，并藉由气凝合成机制，外加一套吹气装置制备氧化钨奈米棒，分别探讨腔体压力与奈米棒平均直径及产率的关系。
The plasma cloud charge sensor was applied to detect the status of keyhole molten pool during pulsed plasma arc welding, furthermore, the detected signals were studied.
将等离子云传感器应用于脉冲等离子弧焊穿孔熔池小孔状态检测，并对检测信号的波形特征做了深入研究。
This paper introduces the experiment condition and process to carry out hot cutting on silicon nitride ceramics materials with new self-made water-plasma arc equipment.
主要阐述了采用自制新型水介质等离子弧设备对氮化硅陶瓷材料进行加热辅助切削的试验条件及过程。
应用推荐