安全帽注塑模具设计及模腔三维造型CAD/CAM_机械设计毕业论文、模具设计论文、数控论文范文_毕业论文天下网 关键词:安全帽;注塑模;CAD/CAM。 [gap=722]Key Words: safety helmet; injection mould; CAD/CAM.
基于1438个网页-相关网页
塑料挂钩座注射模具设计-注塑模具类-木哥机械资料商城[机械毕业设计|论文] 关键词:挂钩座;注塑模具;计算机辅助设计 [gap=467]Key words: plastic pothook; injection mould; CAD
基于1259个网页-相关网页
洗衣机水管接口塑料模具的设计_机械设计毕业论文、模具设计论文、数控论文范文_毕业论文天下网 关键词:注射模;侧向抽芯;管接头 [gap=1300]Keywords : injection mould;core-pulling;union.
基于740个网页-相关网页
卡通饮水机底座产品完善及注射成形模具设计-机械设计制造及自动化论文-收费论文 关键词:注射模具;UG软件;模具设计;饮水机; [gap=1104]Key words:injection mould;UG software;mould design;drinking fountains;
基于74个网页-相关网页
plastic injection mould 注塑模 ; 注塑模具 ; 塑料注塑模具
injection mould for thermoplastics 热塑性塑料注射模
plastic injection mould machine 注塑机 ; 注射机
injection mould design 注塑模具设计 ; 注射模设计 ; 模具设计 ; 注塑模设计
injection mould engineer 注塑工程师
Insert Injection Mould 带五金件塑料模具
Design of injection mould 注塑模设计
High Speed Injection Mould 薄壁胶件模具
By the use of Pro/E software,the injection mould for automobile locked-lid was designed reasonably.
合理地设计了汽车内饰件锁扣盖注塑模具。
参考来源 - 汽车锁扣盖注塑模具设计The process of injection mould design and analysis with CAD/CAE software was stated by an example. Feed route of side cavity in processing was designed based on MasterCAM,and its manufacture process was simulated.
通过实例,阐述了采用CAD/CAE软件进行注射模设计和分析的过程,并运用MasterCAM对该结构件侧型腔模进行了加工刀路设计,模拟其加工过程。
参考来源 - 基于Pro/EThe structure and working process of an injection mould for moulding a centralized piping port and a cover lid were stated after an analysis on the forming process and technological characteristics of the products.
通过对中心管件与盖件2个塑件的工艺分析,介绍了注射成型模具的结构及工作过程。
参考来源 - 基于UG的中心管件与盖件注射模设计The injection mould standard part, common part and standard injection mould base libraries were designated with parametrical modeling technology to reduce the repetitive work time and shorten design cycle.
通过参数化建模,进行标准零件库、常用件库及标准模架库的开发,减少花费在重复性工作上的时间,从而达到缩短注塑模具设计周期的目的。
参考来源 - 基于混合优化算法的注射模具参数优化研究·2,447,543篇论文数据,部分数据来源于NoteExpress
The design of cooling system for plastic injection mould has much to do with the production efficiency and product quality.
注塑模冷却系统的设计直接影响着注塑生产效率及塑件质量。
The mould structure was proved to be reasonable and reliable by practice, being valuable for the design of injection mould for similar parts.
经生产验证,该模具结构设计合理、可靠,对类似产品的注射模设计有很好的参考价值。
Injection mould feed system is an important component of the structure design of injection mould, and is also the only channel for molten plastic flowing into mold cavity.
浇注系统是注塑模具结构设计中的一个重要组成部分,也是塑料熔体进入模具型腔的唯一通道。
应用推荐