The chain guide is malleable iron.
链条导轨是可锻铸铁。
Sprocket rim made from cast iron, chain guide is malleable iron.
链轮是由铸铁制成，链条则是由可锻铸铁制成。
All these delicate small spare parts are cast from malleable iron.
精密的小零件，都是用马铁铸造而成的。
The graphite annealing, can get malleable iron, processing is convenient.
经石墨化退火后，即可得到可锻铸铁，加工方便。
It's action is insulation protection. The body made of high-intensity malleable iron, hot-dip galvanized.
主体材料采用高强度可锻铸铁，热镀锌防锈。
The body and wedge are malleable iron, the other parts are steel, all ferrous parts are hot-dip galvanized.
线夹的本体和楔子为可锻铸铁，热镀锌。其余为热镀锌钢制件。
Rolled, forged, or cast steel, or malleable iron fittings may be used. Cast iron is not permissible for fittings.
可以使用轧制钢、铸钢或坩埚钢、或者铸铁装置，不允许用生铁。
Applicable to high tensile strength metal grinding, such as general carbon steel, alloy steel, malleable iron hard bronze.
适用于中高抗张强度金属材料的磨削，如一般碳素钢，合金钢，可锻铸铁，硬青铜等。
We are professional on malleable iron pipe fittings. They are used for joining pipes lines of water, steam, gas, oil and etc.
我们是一家专业生产玛钢管件的公司。玛钢管子零件应用于供水管道、水蒸气管道、煤气管道、输油管道的连接。
Texture of material:The body and a box cover for malleable iron; screws made of 304 staintess steel; the gasket material for rubber.
材质：穿线盒体和盒盖为热浸锌可锻铸铁；螺丝材质为不锈钢304；垫圈材质为橡胶。
In this paper, a new method for measuring the microstructure of malleable iron by employing the magnetic permeability is put forward.
提出利用材料的磁导率检测可锻铸铁金相组织及硬度的新方法。
The body and wedge are malleable iron. The cotter pin is stainess steel. The other parts are steel. All ferrous parts are hot-dipgalvaized.
线夹的本体和楔子为可锻铸铁，热镀锌。其余为热镀锌钢制件。
The clamp body and keepers malleable iron, cotter-pins are stainless steel, the other parts are steel. All ferrous parts are hot-dip galvanized.
线夹和压板为铝合金制件，闭口销为不锈钢制件，其余为热镀锌钢制件。
The clamp body and keepers are malleable iron, cotter-pins are stainless steel, the other parts are steel. All ferrous parts are hot-dip galvanized.
线夹本体和压板可锻铸铁件，闭口销为不锈钢制件，其余为钢制件、可锻铸铁件和钢制件热镀锌。
The clamp body and keepers are malleable iron, cotter-pins are stainless steel, the other parts are steel . All ferrous parts are hot-dip galvanized.
线夹本体和压板为可锻铸铁件，闭口销为不锈钢制件，其余为钢制件、可锻铸铁件和钢制件热镀锌。
Impeller for the three single-string bending garden leaves, use a semi-enclosed impeller, and the use of malleable iron, so high strength, corrosion resistance;
叶轮为三片单园弦弯叶，选用半封闭叶轮，并采用可锻铸铁、所以强度高，耐腐蚀；
Because malleable iron is obtained by heat treatment of white cast iron there are certain relations between the structure of white cast iron and its heat treatment.
可锻铸铁是白口铁经石墨化热处理而得，所以白口铁的组织与热处理有一定的关系。
Because of the restrictions due to bearing its own steel, small manufacturers and shoddy imported bearings bearing most of the use of ordinary steel, carbon steel, malleable iron.
因为由于轴承自身钢质的限制，小的轴承厂家和伪劣的进口轴承大多使用普通钢材、碳钢、玛钢。
The influence of SG inoculant on graphitizing annealing of malleable cast iron was investigated.
研究了SG变质剂对可锻铸铁石墨化退火的影响。
In this article, the influence of silicon content and temperature on impact toughness of malleable nodular cast iron has been studied.
研究了硅量和温度对球墨可锻铸铁冲击韧性的影响。
Mobile jaw drip-forged with high quality carbon steel, inactivate treatment, malleable cast iron handle and drip.
钳口采用优质碳钢锻造，钝化处理，可锻铸铁柄柄部占塑！
The effect of Si on the crystal lattice parameters, lattice volume and crystal defects of the eutectic cementite in malleable cast iron has been studied by using X ray diffractometer and TEM.
采用X-射线衍射仪、透射电镜研究了可锻铸铁白口组织中硅对共晶渗碳体点阵参数、晶胞体积及晶体缺陷的影响。
This paper studies the process of heat treatment of particle pearlite malleable cast iron by the way of microstructure.
课题是对影响珠光体可锻铸铁组织及性能的因素进行研究，从而优化珠光体可锻铸铁热处理工艺。
The effect of the rare earth compound inoculant on graphitizing the annealing period of the malleable cast-iron was studied and analyzed.
配制了以稀土元素为主的可锻铸铁复合孕育剂，进行了生产实验，研究和分析了稀土复合孕育剂对可锻铸铁石墨化退火周期的影响。
Effect of inoculation treatment on the low temperature graphitization of malleable cast iron;
对铸态可锻铸铁的材质、孕育处理及石墨化退火工艺进行了研究。
In this paper the range of manganese and sulphur constituents of ferritic malleable cast iron and the correlation between them are studied.
本文研究了铁素体可锻铸铁的锰硫量范围及其相互关系。
Stems shall be of dezincification-resistant silicon bronze ASTM B 371 or low-zinc alloy B 99, non-asbestos packing and malleable or ductile iron handwheel.
阀杆材质是符合美国材料试验协会ASTMB 371标准抗失锌现象的硅青铜，或B 99低锌合金，不含石棉的填料，和可锻或球墨铸铁手轮。
Stems shall be of dezincification-resistant silicon bronze ASTM B 371 or low-zinc alloy B 99, non-asbestos packing and malleable or ductile iron handwheel.
阀杆材质是符合美国材料试验协会ASTMB 371标准抗失锌现象的硅青铜，或B 99低锌合金，不含石棉的填料，和可锻或球墨铸铁手轮。
应用推荐